TB/T 2073-2010 电气化铁路接触网零部件技术条件
作者:标准资料网 时间:2024-05-26 22:31:56 浏览:8792
来源:标准资料网
基本信息
标准名称: | 电气化铁路接触网零部件技术条件 |
英文名称: | General technical specification of fittings for overhead contact in electrification railway |
中标分类: |
铁路 >>
牵引供电 >>
接触网零件 |
ICS分类: |
电气工程 >>
电力牵引设备
|
替代情况: | 替代TB/T 2073-2003 |
发布部门: | 中华人民共和国铁道部 |
发布日期: | 2010-06-09 |
实施日期: | 2010-12-01 |
首发日期: | |
作废日期: | |
主管部门: | 中铁电气化局集团有限公司 |
提出单位: | 中铁电气化局集团有限公司 |
归口单位: | 中铁电气化局集团有限公司 |
起草单位: | 中铁电气化局集团有限公司、中铁电气化勘测设计研究院 |
起草人: | 高鸣、邢尊军、王作祥、张焕武 |
出版社: | 中国铁道出版社 |
出版日期: | 2010-12-01 |
适用范围
标准规定了电气化铁路接触网零部件的术语、定义、分类、技术要求、检验规则、标志及包装。
本标准适用于电气化铁路接触网系统各类零部件。
对城市轨道交通架空接触网采用的同类零部件可参照本标准,对在特殊腐蚀介质区段(如城郊SO2,等烟气严重地段)和高寒、高拔环境条件下使用的接触网零部件还应满足其他的有关规定。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 铁路 牵引供电 接触网零件 电气工程 电力牵引设备
【英文标准名称】:Cranes.Powerdrivenwinchesandhoists.Part2:Powerdrivenhoists
【原文标准名称】:起重机.电动绞车和提升设备.第2部分:电动提升设备
【标准号】:BSEN14492-2-2006+A1-2009
【标准状态】:现行
【国别】:英国
【发布日期】:2008-01-31
【实施或试行日期】:2008-01-31
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:皮带传动;建筑起重机;链传动;链式提升机;起重机;定义(术语);传动链;卷筒;软轴传动;危害;起重设备;起升卷筒;起重吊索;提升机;液压设备;提升设备;提升齿轮;载荷盛装部件;机械驱动;机械工程;机械安全性;气动设备;动力驱动;索缆驱动;安全性要求;规范(验收);钢丝绳;磁带张力;电车系统;绞车;绕线机构
【英文主题词】:Beltdrives;Buildinghoists;Chaindrives;Chainhoists;Cranes;Definitions;Drivingchains;Drums;Flexibleshaftdrives;Hazards;Hoistingdevices;Hoistingdrums;Hoistingslings;Hoists;Hydraulicequipment;Liftingequipment;Liftinggears;Load-containingdevices;Mechanicaldrive;Mechanicalengineering;Mechanicalsafety;Pneumaticequipment;Powerdrives;Ropedrive;Safetyrequirements;Specification(approval);Steel-wireropes;Tapetension;Trolleysystem;Winches;Windingmechanism
【摘要】:ThisEuropeanStandardisapplicabletothedesign,informationforuse,maintenanceandtestingofpowerdrivenhoistswithorwithouttrolleysforwhichtheprimemoverisanelectric,hydraulicorpneumaticmotor.Theyaredesignedfortheliftingandloweringofloadswhicharesuspendedonhooksorotherloadliftingattachments.Hoistscanbeusedeitherincranes,inothermachines,e.g.raildependentstorageandretrievalequipment,monorailconveyorsorbyitself.ThisEuropeanStandardisapplicabletothefollowingtypesofhoist:a)ropehoist;b)chainhoist;c)belthoist,exceptbelthoistwithsteelbeltsashoistingmedia;d)opentypehoist;e)NGLbuildinghoistsincludingsupportingstructures.ThisEuropeanStandardisnotapplicableofthefollowinghazards:i)thisEuropeanStandarddoesnotcoverhazardsrelatedtobuildershoistsforthetransportofgoodsasdefinedin2000/14/EC;ii)thisEuropeanStandarddoesnotcoverhazardsrelatedtotheliftingofpersons.NOTETheuseofhoistsfortheliftingofpersonsmaybesubjecttospecificnationalregulations.ThisEuropeanStandarddoesnotspecifyadditionalrequirementsforhazardsrelatedtotheuseofhoistsinexplosiveatmospheresinundergroundworks.ThesignificanthazardscoveredbythisEuropeanStandardareidentifiedinClause4.ThisdocumentisnotapplicabletopowerdrivenhoistswhicharemanufacturedbeforethedateofpublicationofthisEuropeanStandardbyCEN.
【中国标准分类号】:J80
【国际标准分类号】:53_020_20
【页数】:122P.;A4
【正文语种】:英语
【英文标准名称】:TestMethodforWaterSeparabilityofPetroleumOilsandSyntheticFluids(05.01)
【原文标准名称】:石油和合成流体中水的可分离性的试验方法(05.01)
【标准号】:ANSI/ASTMD1401-1995
【标准状态】:作废
【国别】:美国
【发布日期】:1995
【实施或试行日期】:
【发布单位】:美国国家标准学会(ANSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:试验;石油产品
【英文主题词】:testing;petroleumproducts
【摘要】:
【中国标准分类号】:E30
【国际标准分类号】:75_120;75_040
【页数】:
【正文语种】:英语