SAE AMS5382 Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings, 54Co - 25.5Cr - 10.5Ni - 7.5A, As-Cast

上一篇: SAE AMS2468 Hard Anodic Coating Treatment of Aluminum Alloys (Cancelled Sep 1999, Superseded by AMS2469)
下一篇: SAE AMS7730 Depleted Uranium Castings (Cancelled Sep 2009)

MIL-PRF-38535G, PERFORMANCE SPECIFICATION: INTEGRATED CIRCUITS (MICROCIRCUITS) MANUFACTURING, GENERAL SPECIFICATION FOR (10 MAR 2006)., This specification establishes the general performance requirements for integrated circuits or microcircuits and the quality and reliability assurance requirements, which are to be met for their acquisition. The intent of this specification is to allow the device manufacturer the flexibility to implement best commercial practices to the maximum extent possible while still providing product that meets military performance needs. Detail requirements, specific characteristics of microcircuits, and other provisions which are sensitive to the particular use intended will be specified in the device specification. Quality assurance requirements outlined herein are for all microcircuits built on a manufacturing line which is controlled through a manufacturer's quality management (QM) program and has been certified and qualified in accordance with requirements herein. Several levels of product assurance including RHA are provided for in this specification. The certification and qualification sections found herein outline the requirements to be met by a manufacturer to be listed on a Qualified Manufacturer Listing (QML). After listing of a technology flow on a QML, the manufacturer is to continually meet or improve the established baseline of certified and qualified procedures, the QM program, the manufacturer's review system, the status reporting, and quality and reliability assurance requirements for all QML products. The manufacturer may present alternate methods of addressing the requirements contained in this specification. This specification requires a manufacturer to establish a process flow baseline. If sufficient quality and reliability data is available, the manufacturer, through the QM program and the manufacturer's review system, may modify, substitute, or delete tests. Class T is not for use in National Aeronautics and Space Administration (NASA) manned, satellite, or launch vehicle programs without written permission from the applicable NASA project office (i.e., cognizant electrical, electronic, and electromechanical (EEE) parts authority).MIL-G-1298C, MILITARY SPECIFICATION: GUNS, MACHINE, CALIBER .50, BROWNING, M2, HEAVY BARREL (17 NOV 1981) [MIL-G-001298C USED IN LIEU OF MIL-G-1298A] [S/S BY MIL-DTL-00129D]., This specification is approved for use by the U.S. Army Armament Research and Development Command, and is available for use by all Departments and Agencies of the Department of Defense. This specification covers automatic, recoil-operated, link-belt fed, air-cooled caliber .50 heavy barrel machine guns for fixed or flexible installation on ground mounts and combat vehicles.